Bronze-Filled Polytetrafluoroethylene
Available in 40%, 60% bronze-fill levels | Sheets | Rods | Tubes | Machined Parts
Bronze-Filled PTFE is the highest load-bearing grade of filled PTFE. The addition of bronze powder substantially improves compressive strength, wear resistance, and thermal conductivity — making it ideal for heavily loaded dynamic applications such as hydraulic piston rings, guide rings, and bearing pads.
Its excellent thermal conductivity allows efficient heat dissipation at friction surfaces, extending service life in demanding environments.
Enquiry Now →
Carbon-Filled Polytetrafluoroethylene
Available in 15%, 25% carbon-fill levels | Sheets | Rods | Tubes | Machined Parts
Carbon-Filled PTFE is reinforced with carbon powder or carbon fibres to enhance hardness, wear resistance, thermal conductivity, and dimensional stability compared to Virgin PTFE.
It performs well in high-speed, high-temperature, and dynamic sliding applications while maintaining excellent chemical resistance.
Enquiry Now →
carbon-graphite-filled-Polytetrafluoroethylene
Hybrid compound for dynamic sealing | Sheets | Rods | Tubes | Machined Parts
Carbon + Graphite-Filled PTFE is a hybrid compound that combines the hardness and wear resistance of carbon with the lubricity of graphite. This combination delivers superior performance in dynamic sealing applications — offering lower friction than carbon-only grades and better wear resistance than graphite-only grades.
Enquiry Now →
Glass-Filled Polytetrafluoroethylene
Available in 15%, 25% glass-fill levels | Sheets | Rods | Tubes | Machined Parts
Glass-Filled PTFE is a reinforced PTFE material containing 15% or 25% glass fibres. The glass reinforcement improves the material’s strength, creep resistance, wear resistance, and dimensional stability compared to standard Virgin PTFE. It performs reliably under continuous loads and demanding operating conditions while maintaining good chemical resistance and low friction.
It is widely used for seals, valve seats, piston rings, guide rings, thrust washers, pump components, and chemical processing equipment. It is available in sheets, rods, tubes, and custom-machined components as per customer drawings and requirements.
Enquiry Now →
Graphite-Filled Polytetrafluoroethylene
Available in 15%, 25% graphite fill levels | Sheets | Rods | Tubes | Machined Parts
Graphite-Filled PTFE combines the tribological benefits of graphite with the chemical inertness of PTFE. Graphite improves wear performance and is particularly effective in wet environments involving water and steam — unlike some other fillers, graphite does not corrode or degrade in these media.
Enquiry Now →
MoS₂-Filled (Molybdenum Disulphide) Polytetrafluoroethylene
Available in 2%, 5% MoS₂ fill levels | Sheets | Rods | Tubes | Machined Parts
MoS₂-Filled PTFE incorporates fine particles of molybdenum disulphide, a naturally self-lubricating mineral, into the PTFE matrix. This combination delivers lower friction at higher pressures and speeds, while improving hardness and compressive properties compared to virgin PTFE.
Enquiry Now →
Polyamide
Sheets | Rods | Tubes | Cast Blocks | Custom Machined Components
Nylon, commonly available as PA6 (Polyamide 6) and PA66 (Polyamide 66), is a high-performance engineering thermoplastic known for its excellent mechanical strength, wear resistance, and good chemical resistance. It is one of the most widely used materials in mechanical and load-bearing applications.
In solid form, Nylon is available as extruded and cast sheets, rods, tubes, and blocks for machining and structural applications. Cast Nylon (PA6G) is especially preferred for heavy-duty industrial components due to its improved mechanical strength, reduced internal stress, and better dimensional stability in large sizes.
Nylon offers excellent abrasion resistance, high tensile strength, and good fatigue resistance.
Enquiry Now →
Polyether Ether Ketone Filled Polytetrafluoroethylene
Sheets | Rods | Tubes | Custom Machined Components
PEEK-Filled PTFE is one of the most technically advanced filled PTFE compounds available. By incorporating finely dispersed PEEK (Polyether Ether Ketone) particles into the PTFE matrix, this grade achieves a remarkable combination of properties that neither material alone can provide: the chemical inertness, low friction, and non-stick character of PTFE combined with the exceptional mechanical strength, hardness, and creep resistance of PEEK.
The result is a high-performance sealing and bearing material that withstands higher loads, higher speeds, and more aggressive chemical environments than any standard single-filler PTFE compound — including glass-filled, carbon-filled, or bronze-filled grades. It is the compound of choice for the most demanding dynamic sealing, high-pressure, and high-temperature applications in oil & gas, chemical processing, aerospace, and semiconductor industries.
Enquiry Now →
Polyether Ether Ketone Filled PTFE
Sheets | Rods | Tubes | Custom Machined Components
PEEK-Filled PTFE is one of the most technically advanced filled PTFE compounds available. By incorporating finely dispersed PEEK (Polyether Ether Ketone) particles into the PTFE matrix, this grade achieves a remarkable combination of properties that neither material alone can provide: the chemical inertness, low friction, and non-stick character of PTFE combined with the exceptional mechanical strength, hardness, and creep resistance of PEEK.
The result is a high-performance sealing and bearing material that withstands higher loads, higher speeds, and more aggressive chemical environments than any standard single-filler PTFE compound — including glass-filled, carbon-filled, or bronze-filled grades. It is the compound of choice for the most demanding dynamic sealing, high-pressure, and high-temperature applications in oil & gas, chemical processing, aerospace, and semiconductor industries.
PEEK filler is chemically inert, meaning it does not corrode, leach, or react with process media — making PEEK-filled PTFE safe for pharmaceutical, food-contact, and ultra-high-purity environments. There is no metallic contamination risk.
Enquiry Now→
Hot
Polyethylene Terephthalate
Sheets | Rods | Tubes | Custom Machined Components
PET (Polyethylene Terephthalate) is a high-strength, semi-crystalline engineering thermoplastic known for its excellent dimensional stability, high stiffness, and low moisture absorption. It offers a superior combination of mechanical strength and precision performance compared to many standard engineering plastics.
Solid PET material is available in sheets, rods, and tubes for precision machining applications. Due to its low water absorption and excellent creep resistance, PET is particularly suitable for tight-tolerance components operating under load.
Enquiry Now →
Polyethylene Terephthalate new
Sheets | Rods | Tubes | Custom Machined Components
PET (Polyethylene Terephthalate) is a high-strength, semi-crystalline engineering thermoplastic known for its excellent dimensional stability, high stiffness, and low moisture absorption. It offers a superior combination of mechanical strength and precision performance compared to many standard engineering plastics.
Solid PET material is available in sheets, rods, and tubes for precision machining applications. Due to its low water absorption and excellent creep resistance, PET is particularly suitable for tight-tolerance components operating under load.
Enquiry Now →
Polyvinylidene Fluoride
Sheets | Rods | Pipes | Fittings | Custom Machined Components
PVDF (Polyvinylidene Fluoride) is a high-performance fluoropolymer known for its exceptional chemical resistance, high purity, and excellent mechanical strength. It is widely used in demanding chemical, pharmaceutical, and high-temperature industrial environments where long-term reliability is critical.
PVDF material is available in sheets, rods, and pipes for fabrication and precision machining applications. It offers superior resistance to aggressive chemicals, acids, solvents, and oxidizing agents compared to many conventional engineering plastics.
Enquiry Now →
POM (Polyoxymethylene)
Sheets | Rods | Tubes | Custom Machined Components
POM (Polyoxymethylene), commonly known as Acetal and widely recognized under the trade name Delrin®, is a high-performance engineering thermoplastic known for its excellent dimensional stability, high stiffness, low friction, and outstanding machinability.
Among its advanced grades, Delrin® AF (Acetal + PTFE fiber filled) is specifically engineered for low-friction and wear-resistant applications. Delrin® AF combines the strength and rigidity of acetal with the self-lubricating properties of PTFE fibers, resulting in significantly reduced wear, lower coefficient of friction, and improved performance in dry-running environments. This makes it particularly suitable for sliding, bearing, and precision motion components where lubrication is limited or not preferred.
Enquiry Now →
Stainless Steel-Filled Polytetrafluoroethylene
Sheets | Rods | Tubes | Custom Machined Components
Stainless Steel-Filled PTFE is an advanced compound in which fine stainless steel powder — typically 316L or 304 grade — is uniformly blended into the PTFE matrix before compression moulding.
This combination delivers the highest compressive strength and hardness achievable in a PTFE compound while fully retaining PTFE's core attributes: chemical inertness, non-stick surface, and wide operating temperature range.
Compared to bronze-filled PTFE — the traditional choice for high-load applications — SS-filled PTFE offers a critical advantage in chemically aggressive environments. Stainless steel does not corrode in contact with most process chemicals, making this grade ideal for corrosive fluid systems, aggressive acids, and applications where metallic contamination from bronze is unacceptable (pharmaceutical, food, high-purity chemical service).
Enquiry Now →
UHMW-PE (PE 1000)– Ultra High Molecular Weight Polyethylene
Sheets | Rods | Profiles | Custom Machined Components
UHMW-PE (Ultra High Molecular Weight Polyethylene), also known as PE 1000, is a high-performance engineering thermoplastic known for its extremely high molecular weight, resulting in exceptional wear resistance and impact strength. It is widely used in applications where abrasion resistance, low friction, and long service life are critical.
In solid form, UHMW-PE is available as sheets, rods, and custom profiles for machining and fabrication. It is extensively used in high-wear environments such as conveyor systems, liners, chutes, guide rails, and impact plates. Its ultra-low coefficient of friction allows smooth sliding performance, making it ideal for material handling and packaging industries.
UHMW-PE exhibits excellent chemical resistance and virtually zero moisture absorption, ensuring dimensional stability even in wet or corrosive environments.
Enquiry Now →
Virgin PTFE - Polytetrafluoroethylene
Sheets | Rods | Tubes | Pipes | Custom Machined Components
Virgin PTFE (Polytetrafluoroethylene) — widely known by its trade name Teflon® — is one of the most chemically inert and thermally stable engineering plastics available today. Produced from 100% pure, unmodified PTFE resin with no recycled or reprocessed content, Virgin PTFE offers unmatched chemical resistance, an extremely low coefficient of friction, and exceptional electrical insulating properties across a broad temperature range.
In solid form, Virgin PTFE is available as compression-moulded sheets, rods, and tubes, as well as extruded profiles and pipes — all suitable for precision machining and custom component fabrication. Its near-universal chemical compatibility makes it the material of choice for aggressive environments in chemical processing, pharmaceutical, food, semiconductor, and fluid-handling industries.
Enquiry Now →
Showing all 18 results